How Much Does a Plumber Cost in Houston?

Short answer: most Houston homeowners pay $150–$850 for a typical plumbing repair, about $1,300–$2,500 for a water heater replacement, and $4,000–$15,000 for a whole-house repipe. This guide pulls together published 2025–2026 cost-guide ranges, explains what drives the price, and shows you how to sanity-check a quote. These are planning ranges from third-party sources, not quotes: the only real price for your home comes from an on-site look at the problem.

Call (512) 981-5674 Get a Diagnosis & Quote

The headline numbers

FigurePublished range
Service call / diagnosis fee$95–$300
Typical repair (toilet, faucet, disposal, accessible leak)$150–$850
Water heater replacement, conventional tank installed$1,300–$2,500
Whole-house repipe$4,000–$15,000
Slab leak, detection + repair$1,750–$5,000 combined, typical

Cost by job type

JobTypical published range
Toilet repair / replacement$150–$400 / $300–$650
Faucet repair or replacement$150–$550
Garbage disposal replacement$250–$600
Drain clearing, single fixture$150–$350
Main sewer line clearing$250–$600
Camera inspection$200–$500
Water heater repair$200–$900
Tankless water heater installation$2,500–$4,800
Electronic leak detection$250–$600
Sewer line replacement$3,000–$12,000+

What drives the price up or down

How to compare quotes fairly

  1. Get the price in writing, flat for defined work, with the fixture/part models listed.
  2. Confirm the Texas plumbing license number of every company you seriously consider.
  3. Ask what's excluded: permits, drywall/concrete patching, haul-away, warranty terms.
  4. For sewer and slab work, require the evidence: camera video or detection readings.
  5. For recurring problems, price the permanent fix (reroute, repipe) against the next two likely repairs.

Frequently asked questions

What is the average cost of a plumber in Houston?

A service call typically runs $95–$300, and most common repairs land between $150 and $850 all-in. Bigger defined jobs — water heater replacement, sewer work, repiping — are quoted flat after a look at the problem.

Why do plumbing quotes for the same job vary so much?

Scope and parts. One quote may use a builder-grade fixture and exclude permit and patching; another includes a better fixture, the permit, and drywall repair. Compare written line items — fixture model, scope, warranty — not just the total.

Should I pay for leak detection before a slab-leak repair?

Yes. Detection typically costs $250–$600 and pinpoints the leak so the repair opens the right spot. Companies that quote slab repairs without detection are guessing — and the guess is usually priced in their favor.

Does insurance cover slab leaks?

Often partially: many policies cover sudden water damage to the home (flooring, drywall) but not the cost of repairing the pipe itself, and access costs vary by policy. Confirm the leak, stop the water, and call your insurer early.

About these figures

Ranges on this page are compiled from published national and Houston-area cost guides (including Angi, HomeAdvisor, and HomeGuide cost data) for planning purposes. They are not quotes, and your actual price depends on your home, your system, and an on-site evaluation.

Ready for a real number on your home?

Request a diagnosis or project quote from a local licensed Houston plumbing company — free to request, no obligation.

Call (512) 981-5674 Request Service Online
Call (512) 981-5674 Get a Quote →