Whole-House Repiping in Houston, TX
A repipe replaces your home's water supply lines — the permanent fix when the pipes themselves, not any single fixture, are the problem. Houston's candidate homes are easy to spot: 1960s–1980s houses with original galvanized steel that's rusting closed from the inside, and slab homes whose under-slab copper has leaked more than once. If you're repairing leaks one at a time, this page is about when to stop and do it once, properly.
Signs a repipe beats another repair
- Second or third slab leak — under-slab copper repairs run into the thousands each, and the next leak is a matter of time
- Water pressure that has faded year after year (galvanized pipe corroding shut)
- Rusty or discolored water, especially first thing in the morning
- Visible corrosion, pinhole leaks, or patched sections in exposed pipe
- A remodel is opening the walls anyway — the cheapest moment to repipe
How a modern repipe works
Most Houston repipes use PEX — flexible cross-linked polyethylene tubing run through walls and attic instead of under the slab. That routing is the point: new lines go where they're accessible, and the old under-slab lines are abandoned in place. A typical whole-house repipe takes 2–5 days, water is usually back on each evening, and drywall openings are kept as small as routing allows (patching may or may not be included — confirm in the quote). Copper and CPVC are alternatives in specific situations; a good company will explain the choice for your home rather than selling one material for every house.
What repiping typically costs in Houston
| Scope | Typical published range |
|---|---|
| Partial repipe (one area / a few lines) | $1,500–$4,500 |
| Whole-house repipe, smaller home (1–2 bath) | $4,000–$8,000 |
| Whole-house repipe, larger home (3+ bath) | $7,500–$15,000 |
| Single slab-leak repair (for comparison) | $1,500–$4,000+ |
Ranges are published third-party figures for planning only — see the cost guide. Price drivers: number of fixtures, two-story vs. one-story, and whether drywall patching and permits are included.
Questions to ask on a repipe quote
- PEX, copper, or CPVC — and why for my house?
- Will new lines route through the attic/walls, fully abandoning the under-slab lines?
- Are permits, inspection, and drywall patching included or excluded?
- How many days, and will we have water each night?
- What warranty covers materials and labor?
Get a written quote before you commit
Send a request and we'll match you with one local licensed plumbing company for a diagnosis and written quote — free to request, no obligation.
Related services
Leak detection · Plumbing repair · Water heaters · Houston plumbing cost guide